Question 81
An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. The solution must meet these criteria: -The Recovery Point Objective must be 48 hours. -The backup must use encrypted transmission. The Recovery Time Objective must be 4 hours. Which configuration set must be used in the scheduled backup to meet these requirements?
A. Protocol: FTP Schedule: Bi-Weekly
B. Protocol: SFTP Schedule: Weekly
C. Protocol: TFTP Schedule: Bi-Weekly
D. Protocol: SCP Schedule: Daily
Question 82
Refer to the exhibit. What happens to the broadcast traffic when it reaches aggregation switches?
A. Agg-2 switch receives broadcast packets and stops forwarding to the peer link on Agg-1 switch.
B. Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2/4 and Eth2/5.
C. Agg-1 and Agg-2 switches receive broadcast packets and does not forward them to the peer link or the port channel.
D. Only Agg-1 switch receives broadcast packets and does not forward to the peer link on Agg-2 switch.
Question 83
Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?
A. nondisruptive upgrades via nonstop forwarding
B. configuration changes during an upgrade
C. upgrades to individual modules and line cards
D. zero downtime downgrades via dual supervisor modules
Question 84
An engineer must configure a monitoring solution for a Cisco Nexus 9000 Series Switch based data center. The solution must provide real-time insight into the network health with subscription-based monitoring. The monitoring must be initiated from the client side, and the data must be sent via encryption. Which configuration steps complete the configuration?
A. Configure Grafana on the Nexus switch. Specify the logging certificate. Enable syslog level 7 export to Grafana.
B. Set the telemetry feature on the Nexus switch. Specify a certificate for telemetry transport. Configure a sensor group and destination.
C. Activate SNMPv3 on the Nexus switch. Set the globalEnforcePriv parameter. Configure an SNMP agent to poll information.
D. Enable GRPC on the Nexus switch. Generate a certificate. Configure gNMI inputs in Telegraf and output to InfluxDB.
Question 85
Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Series Switch. What is displayed when this command is executed?
A. features that are enabled automatically after the downgrade
B. impact of a software upgrade in ISSU and chassis reload
C. features and commands that are removed automatically from the configuration Most Voted
D. compatibility of software in the system bootflash file
Question 86
The VMM domain is integrated between Cisco APICs and vCenter using a distributed vSwitch. The traffic must be blocked between a subset of endpoints in anEPG based on specific VM attributes and the rest of the VMs in that EPG. Which set of actions blocks this traffic?
A. 1. Set Allow Microsegmentation under the EPG VMM Domain Association to "True" 2. Set Intra-EPG Isolation to "Unenforced" for the EPG 3. Set Intra-EPG Isolation to "Unenforced" for the uSeg EPG
B. 1. Set Allow Microsegmentation under the EPG VMM Domain Association to "False" 2. Set Intra-EPG Isolation to "Unenforced" for the EPG 3. Set Intra-EPG Isolation to "Enforced" for the uSeg EPG
C. 1. Set Allow Microsegmentation under the EPG VMM Domain Association to "True" 2. Set Intra-EPG Isolation to "Enforced" for the EPG 3. Set Intra-EPG Isolation to "Enforced" for the uSeg EPG
D. 1. Set Allow Microsegmentation under the EPG VMM Domain Association to "rue" 2. Set Intra-EPG Isolation to "Enforced" for the EPG 3. Set Intra-EPG Isolation to "Unenforced" for the uSeg EPG
Question 87
DRAG DROP -Drag and drop the firm ware packages from the left onto the software bundles they belong to on the right.Select and Place:
Question 88
Which action must be performed before renumbering a Cisco UCS chassis?
A. Run the shut and no shut command on the connected ports.
B. Move the chassis to new ports on fabric interconnect.
C. Decommission the chassis.
D. Re-acknowledge the chassis.
Question 89
A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level.Which two components support specific power limits? (Choose two.)
A. storage controller
B. network controller
C. processor
D. graphic card
E. memory
Question 90
An engineer is implementing an import operation in Cisco UCS Manager.What is the impact of performing this operation?
A. Information is modified on the management plane only.
B. A configuration is imported from a higher release to a lower release.
C. It is possible to schedule an import operation.
D. Only a configuration file that was exported from the same Cisco UCS Manager is allowed to be imported.
