Question 61
Where is Cisco Hyper__cpLocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
A. Policy Profile
B. AP Join Profile
C. Flex Profile
D. RF Profile
Question 62
The Cisco Hyper__cpLocation detection threshold is currently set to -50 dBm. After reviewing the wireless user __cpLocation, discrepancies have been noticed. To improve the Cisco Hyper__cpLocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series WirelessController does not allow this change to be applied. What actions should be taken to resolve this issue?
A. Disable Cisco Hyper__cpLocation, change the Cisco Hyper__cpLocation detection threshold, and then enable it.
B. Create a new profile on Cisco CMX with the new Cisco Hyper__cpLocation detection range, and apply it on the WLAN.
C. Place the APs to monitor mode, shutdown the radios, and then change the Cisco Hyper__cpLocation detection threshold.
D. Shutdown all radios on the controller, change the Cisco Hyper__cpLocation detection range, and enable the radios again.
Question 63
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
A. analytics
B. connect and engage
C. presence
D. detect and locate
Question 64
An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the __cpLocation accuracy is tested on theCisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?
A. Enable RFID tags in tracking options.
B. Enable probing clients for active tags.
C. Define an RFID group globally and add the tags.
D. Enable hyper__cpLocation services for RFID.
Question 65
An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)
A. The Cisco CMX instances are installed in the same subnet.
B. The types of the primary and secondary Cisco CMX installations differ.
C. The delay between the primary and secondary instance is 200 ms.
D. The sizes of the primary and secondary Cisco CMX installations differ.
E. Both Cisco CMX installations are virtual.
Question 66
Refer to the exhibit. The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
A. The Cisco CMX server receives NetFlow data from the WLC.
B. The Cisco CMX server receives NMSP traffic from the WLC.
C. The Cisco CMX server receives SNMP traffic from the WLC.
D. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
Question 67
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong __cpLocation analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
A. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
D. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
Question 68
An engineer has implemented advanced __cpLocation services for a retail wireless deployment. The marketing department wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per __cpLocation hosted by the provider. Which social connector must be tied intoCisco CMX to provide this service?
A. Gmail
B. Google+
C. Facebook
D. MySpace
Question 69
What are two considerations when deploying a Cisco Hyper__cpLocation? (Choose two.)
A. NTP configuration is available, but not recommended.
B. The Cisco Hyper__cpLocation feature must be enabled only on the wireless LAN controller.
C. After enabling Cisco Hyper__cpLocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
D. The Cisco Hyper__cpLocation feature must be enabled on the wireless LAN controller and Cisco CMX.
E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyper__cpLocation deployments.
Question 70
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?
A. Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
B. Log in to the Cisco CMX CLI and issue set ntp server NTP IP where NTP IP is the IP of the NTP server.
C. Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.
D. Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NTP.
