Question 31
What occurs when running the command install deactivate while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?
A. The current set of packages is committed.
B. The package features for the line card are disabled.
C. The package is removed from the switch.
D. The current upgrade stops.
Question 32
An engineer installed a new Nexus switch with the mgm0 interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the guest shell of the NX-OS?
A. [guestshell@guestshell ~]$ dohost ''ping vrf management 173.37.145.84''
B. [guestshell@guestshell ~]$ chvrf management ping 173.37.145.84
C. [guestshell@guestshell ~$ ping 173.37.145.84 vrf management
D. [guestshell@guestshell ~]$ iping vrf management ip 173.37.145.84
Question 33
A DNS server with IP address 192.168.1.1 is deployed in a data center. A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS.Which configuration should be applied?
A. ficl-mgmt-A# scope fabric-interconnect a ficl-mgmt-A /fabric-interconnect # set name 192.168.1.1 ficl-mgmt-A /fabric-interconnect # scope system ficl-mgmt-A /system # commit-buffer
B. ficl-mgmt-A# scope system ficl-mgmt-A /system # create dns 192.168.1.1 ficl-mgmt-A /system* # commit-buffer
C. ficl-mgmt-A# scope fabric-interconnect a ficl-mgmt-A /fabric-interconnect # set name 192.168.1.1 ficl-mgmt-A /fabric-interconnect* # commit-buffer
D. ficl-mgmt-A# scope system ficl-mgmt-A /system # scope services ficl-mgmt-A /system/services # create dns 192.168.1.1 ficl-mgmt-A /system/services* # commit-buffer
Question 34
Refer to the exhibit. An engineer needs to implement a monitoring session that should meet the following requirements: -Monitor traffic from leaf to leaf switches on a Cisco ACI network. -Support filtering traffic from Bridge Domain or VRF. Which configuration must be added to meet these requirements?
A. interface eth 1/2 leaf 101
B. application epg epg1 app1
C. interface eth 1/2 switch 101
D. application app1 epg epg1
Question 35
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements: -Establish adjacency to the remote peer by using multicast.Enable OTV advertisements for VLAN 100 to the other site. Which two commands should be configured to meet these requirements? (Choose two.)
A. otv extend-vlan 100
B. otv site-vlan 100
C. otv use-adjacency-server 172.27.255.94
D. otv data-group 232.2.2.0/28
E. otv control-group 232.1.1.1
Question 36
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1: *vNIC and vHBA profiles; *Fan speed and power redundancy profile of UCS Manager. Which two roles must be assigned to a user to achieve this goal? (Choose two.)
A. facility-manager
B. server-equipment
C. operations
D. server-profile
E. server-compute
Question 37
Refer to the exhibit. Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
A. IPv4 multicast address
B. IPv4 unicast address
C. IPv4 gateway address
D. IPv4 anycast address
Question 38
Refer to the exhibit. A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?
A. The switch reboots one time for the new EPLD versions to take effect.
B. The switch reboots multiple times for the new EPLD versions to take effect.
C. The switch skips the EPLD upgrade for each EPLD device of the switch.
D. The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.
Question 39
Which behavior defines streaming telemetry as a push model in Cisco devices?
A. Events and network changes generate telemetry data
B. Monitoring clients are pulling data from the network to see real-time statistics
C. JSON encoded telemetry data is transported using the gRPC protocol
D. The network devices send data in JSON or GPB format to configure endpoints
Question 40
After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced. Which two actions must be taken to meet this requirement before the isolated device is reloaded? (Choose two.)
A. Change the vPC system-priority of the replacement chassis to a higher value than the peer
B. Set the vPC MAC address to a higher value than the peer
C. Configure auto-recovery to the disable state on both peers
D. Set the vPC MAC address to a lower value than the peer
E. Change the vPC system-priority of the replacement chassis to a lower value than the peer
