Win IT Exam with Last Dumps 2024


Cisco 350-501 Exam

Page 4/26
Viewing Questions 31 40 out of 253 Questions
15.38%

Question 31
Refer to the exhibit. Which type of DDoS attack will be mitigated by this configuration?
Image 350-501_31Q.png related to the Cisco 350-501 Exam
A. teardrop attack
B. smurf attack
C. SYN flood
D. SIP INVITE flood attacks

Question 32
Refer to the exhibit. While troubleshooting the network, a network operator with an employee id: 1234:55:678 is trying to ping XR1. Which result should the operator expect when trying to ping to an XR1 local address?
Image 350-501_32Q.png related to the Cisco 350-501 Exam
A. AII ICMP traffic is dropped
B. AII ICMP traffic responds successfully
C. ICMP traffic works at a policed rate of 19 bytes per second every 100 ms
D. ICMP traffic works at a policed rate of 19 packets every 100 ms

Question 33
Refer to the exhibit. Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
Image 350-501_33Q.png related to the Cisco 350-501 Exam
A. show cef interface
B. show ip traffic
C. show ip interface
D. show ip interface brief

Question 34
Refer to the exhibit. What is the result of this configuration?
Image 350-501_34Q.png related to the Cisco 350-501 Exam
A. Router 1 opens and closes a TCP connection to the TACACS+ server every time a user requires authorization
B. Router 1 and the TACACS+ server maintain one open connection between them only when network administrator is accessing the router with password ciscotest
C. Router 1 and the TACACS+ server maintain one open connection between them
D. Router 1 opens and closes a TCP connection to the TACACS+ server every time a user requires authentication

Question 35
Which QoS model allows hosts to report their QoS needs to the network?
A. IntServ
B. CB-WFQ
C. DiffServ
D. MQC


Question 36
Refer to the exhibit. Which show command shows statistics for the control plane policy and is used to troubleshoot?
Image 350-501_36Q.png related to the Cisco 350-501 Exam
A. show control-plane CoPP
B. show policy control-plane
C. show control-plane
D. show policy-map control-plane

Question 37
Refer to the exhibit. An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH protocol. Which two actions must the engineer implement to complete the SSH configuration? (Choose two.)
Image 350-501_37Q.png related to the Cisco 350-501 Exam
A. Configure an IP domain name.
B. Configure ACL 100 to permit access to port 22.
C. Configure a password under the vty lines.
D. Configure crypto keys.
E. Configure service password encryption.

Question 38
Refer to the exhibit. To protect in-band management access to CPE-R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16. Which infrastructure ACL change must be applied to router PE-R9 to complete this task?
Image 350-501_38Q.png related to the Cisco 350-501 Exam
A. ip access-list extended INFRA-ACL 15 permit tcp 192.168.0.0 0.0.255.255 range 49152 65535 100.64.0.0 0.31.255.255 eq 443
B. ip access-list extended INFRA-ACL no 10 15 permit tcp 192.168.0.0 0.0.255.255 range 49152 65535 100.64.0.0 0.31.255.255 eq 22 Most Voted
C. ip access-list extended INFRA-ACL 15 permit tcp 192.168.0.0 0.0.255.255 range 49152 65535 100.64.0.0 0.31.255.255 eq 22
D. ip access-list extended INFRA-ACL no 10 15 permit tcp 192.168.0.0 0.0.255.255 eq 22 100.64.0.0 0.31.255.255 eq 22

Question 39
Refer to the exhibit. A network engineer notices that router R2 is failing to install network 172.16.33.1/32 in the routing table. Which configuration must the engineer apply to R2 to fix the problem?
Image 350-501_39Q.png related to the Cisco 350-501 Exam
A. R2(config)# access-list 1 permit 172.16.33.0 0.0.0.255
B. R2(config)# access-list 1 permit 172.16.33.0 255.255.0.0
C. R2(config)# access-list 1 permit 172.16.33.0 255.255.255.0
D. R2(config)# access-list 1 permit 172.16.33.0 255.0.0.0

Question 40
Which two PHY modes are available to implement an IOS XR 10 Gigabit Ethernet interface? (Choose two.)
A. LAN
B. SONET
C. MAN
D. WAN
E. WDWM