Refer to the exhibit. An engineer is preparing to implement data plane security configuration.Which statement about this configuration is true?
A. Router 1 and Router 2 advertise the route to 192.0.2.0 to all BGP peers.
B. All traffic to 192.168.1.0/24 is dropped.
C. All traffic is dropped.
D. Router 1 drops all traffic with a local-preference set to 150.
Question 22
Which MPLS design attribute can you use to provide Internet access to a major customer through a separate dedicated VPN?
A. The Internet gateway router is connected as a PE router to the MPLS backbone.
B. The CE router supports VRF-Lite and the full BGP routing table.
C. The Internet gateway inserts the full Internet BGP routing table into the Internet access VPN.
D. The customer that needs the Internet access service is assigned to the same RTs as the Internet gateway.
Question 23
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A. flowspec address-family ipv4 local-install interface-all
B. flowspec address-family ipv4 install interface-all local
C. flowspec address-family ipv4 install interface-all
D. flowspec address-family ipv4 local-install all-interface
Question 24
Refer to the exhibit. A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment. Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network.Which action causes the solution to fail?
A. OSPF does not work with L2VPN services.
B. The routing protocol network types are not compatible.
C. A loopback with a /32 IP address has not been used.
D. The xconnect statement has not been defined.
Question 25
An engineer working for telecommunication company needs to secure the LAN network using a prefix list.Which best practice should the engineer follow when he implements a prefix list?
A. An engineer must identify the prefix list with a number only.
B. The final entry in a prefix list must be /32.
C. An engineer must include only the prefixes for which he needs to log activity.
D. An engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.
Question 26
Refer to the exhibit. Which effect of this configuration is true?
A. It enables MPLS on the interface.
B. It creates a pseudowire class named cisco.
C. It enables AToM on interface gigabitethernet1/0.
D. It enables tagging for VLAN 12 on the interface.
Question 27
Refer to the exhibit. Which three outcomes occur if the prefix list is added to the neighbor? (Choose three.)
A. 192.168.0.0/16 is denied.
B. 192.168.0.0/16 is permitted.
C. 192.168.0.0/19 is permitted
D. 192.168.0.0/19 is denied.
E. 192.168.0.0/17 is permitted
F. 192.168.0.0/17 is denied.
Question 28
DRAG DROP -Drag and drop the descriptions from the left onto the corresponding OS types on the right.Select and Place:
Question 29
What does DWDM use to combine multiple optical signals?
A. IP protocols
B. wavelength
C. time slots
D. frequency
Question 30
Refer to the exhibit. A network operator recently configured BGP FlowSpec for the internal IT network. What will be inferred from the configuration deployed on the network?
A. The policy is configured locally on CSR1 and drops all traffic for TCP ports 80 and 443
B. The policy is configured locally on CSR1 and currently has no active traffic
C. The policy is learned via BGP FlowSpec and drops all traffic for TCP ports 80 and 443
D. The policy is learned via BGP FlowSpec and has active traffic
