A network administrator is planning a new network with a segment-routing architecture using a distributed control plane. How is routing information distributed on such a network?
Question 222
Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements: - Session protection is provided for core loopback IP addresses only. - The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails. Which configuration must the team implement on PE-XR1?
Question 223
Refer to the exhibit. A network support engineer for ASN 65502 receives a technical support ticket from a customer in ASN 65503 who reports that an eBGP session is down. The engineer determines that the peering failed after a recent change to the device at 192.168.26.2. EDGE-GW-1 must establish an eBGP session with the peering router 192.168.26.2. Which configuration establishes this session?
Question 224
DRAG DROP -Drag and drop the characteristics from the left onto the automation tool on the right. Select and Place:
Question 225
Refer to the exhibit. A network engineer configures CPE-1 for QoS with these requirements: - IPv4 and IPv6 traffic originated by the CPE-1 WAN IP address must be marked with DSCP CS3. - IPv4 LAN traffic must be marked with DSCP CS1. IPv6 LAN traffic must be marked with DSCP default. Which configuration must the engineer implement on CPE-1?
Question 226
Refer to the exhibit. An engineer is configuring IS-IS on ISP network. Which IS-IS configuration must an engineer implement on router AGG1 so that it establishes connectivity to router AGG6 via the BB3 core router?
Question 227
Refer to the exhibit. EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1. which is used as a black hole route as shown. Which configuration should the operator Implement to me management rouler to create a route map that will redistribute lagged static routes into BGP and create a static route to blackhole traffic with tag 777 that Is destined to server at 192.168.10.100?
Question 228
Refer to the exhibit. EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1. which is used as a black hole route as shown. Which configuration should the operator Implement to me management rouler to create a route map that will redistribute lagged static routes into BGP and create a static route to blackhole traffic with tag 777 that Is destined to server at 192.168.10.100?
Question 229
Refer to the exhibit. Routers P4 and P5 receive the 0.0.0.0/0 route from the ISP via eBGP peering. P4 is the primary Internet gateway router, and P5 is its backup. P5 is already advertising a default route into the OSPF domain. Which configuration must be applied to P4 so that it advertises a default route into OSPF and becomes the primary Internet gateway for the network?
Question 230
Refer to the exhibit. An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings: - The VoIP services are hosted in the 198.19.100.0/24 space. - The customer has been assigned the 198.18.1.0/29 IP address block. - VRF-100 is assigned import and export route target 65010:100. Which configuration must the engineer apply to PE-1 to provision VRF-100 and provide access to the shared services?
