Win IT Exam with Last Dumps 2024

Refer to the exhibit. An engineer must redistribute networks 192.168.10.0/24 and 192.168.20.0/24 into OSPF from EIGRP, where the metric must be added when traversing through multiple hops to start an external route of 20. The engineer notices that the external metric is fixed and does not add at each hop.
Which configuration resolves the issue?

A. R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R2(config)#route-map RD permit 10 R2(config-route-map)#match ip address 10 R2(config-route-map)#set metric 20 R2(config-route-map)#set metric-type type-2 ! R2(config)#router ospf 10 R2(confjg-router)#redistribute eigrp 10 subnets route-map RD

B. R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R2(config)#route-map RD permit 10 R2(config-route-map)#match ip address 10 R2(config-route-map)#set metric 20 R2(config-route-map)#set metric-type type-1 ! R2(config)#router ospf 10 R2(config-router)#redistribute eigrp 10 subnets route-map RD

C. R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R1(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R1(config)#route-map RD permit 10 R1(config-route-map)#match ip address 10 R1(config-route-map)#set metric 20 R1(config-route-map)#set metric-type type-1 ! R1(config)#router ospf 10 R1(config-router)#redistribute eigrp 10 subnets route-map RD

D. R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255 R1(config)#access-list 10 permit 192.168.20.0 0.0.0.255 ! R1(config)#route-map RD permit 10 R1(config-route-map)#match ip address 10 R1(config-route-map)#set metric 20 R1(config-route-map)#set metric-type type-2 ! R1(config)#router ospf 10 R1(config-router)#redistribute eigrp 10 subnets route-map RD

Which feature minimizes DoS attacks on an IPv6 network?

A. IPv6 Binding Security Table

B. IPv6 Router Advertisement Guard

C. IPv6 Prefix Guard

D. IPv6 Destination Guard

Refer to the exhibit. A network administrator must block ping from user 3 to the App Server only. An inbound standard access list is applied to R1 interface G0/0 to block ping. The network administrator was notified that user 3 cannot even ping user 9 anymore. Where must the access list be applied in the outgoing direction to resolve the issue?

A. R2 interface G0/0

B. SW1 interface G1/10

C. R2 interface G1/0

D. SW1 interface G2/21

Refer to the exhibit. An engineer configured BGP and wants to select the path from 10.77.255.57 as the best path instead of current best path. Which action resolves the issue?

A. Configure higher MED to select as the best path.

B. Configure AS_PATH prepend for the current best path.

C. Configure AS_PATH prepend for the desired best path.

D. Configure lower LOCAL_PREF to select as the best path.

What is a function of IPv6 Source Guard?

A. It inspects ND and DHCP packets to build an address binding table.

B. It works with address glean or ND to find existing addresses.

C. It notifies the ND protocol to inform hosts if the traffic is denied by it.

D. It denies traffic from known sources and allocated addresses.

Refer to the exhibit. A network engineer must establish communication between three different customer sites with these requirements:
* Site-A: must be restricted to access to any users at Site-B or Site-C.
* Site-B and Site-C: must be able to communicate between sites and share routes using OSPF.
PE interface configuration:

A. PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 10 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 1

B. PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 20 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 1

C. PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 10 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 0

D. PE(config)#router ospf 10 vrf Site-A PE(config-router)#network 0.0.0.0 255.255.255.255 area 0 PE(config)#router ospf 20 vrf SharedSites PE(config-router)#network 0.0.0.0 255.255.255.255 area 0

Refer to the exhibit. An administrator configures a router to stop using a particular default route if the DNS server 8.8.8.8 is not reachable through that route.
However, this configuration did not work as desired and the default route still works even if the DNS server 8.8.8.8 is unreachable. Which two configuration changes resolve the issue? (Choose two.)

A. Use a separate track object to reference the existing IP SLA 1 probe for every static route.

B. Use a separate IP SLA probe and track object for every static route.

C. Associate every IP SLA probe with the proper WAN address of the router.

D. Reference the proper exit interfaces along with the next hops in both static default routes.

E. Configure two static routes for the 8.8.8.8/32 destination to match the IP SLA probe for each ISP.

Refer to the exhibit. The network administrator configured the Chicago router to mutually redistribute the LA and NewYork routes with OSPF routes to be summarized as a single route in EIGRP using the longest summary mask:
router eigrp 100 redistribute ospf 1 metric 10 10 10 10 10 router ospf 1 redistribute eigrp 100 subnets
!
interface E 0/0
ip summary-address eigrp 100 172.16.0.0 255.255.0.0
After the configuration, the New York router receives all the specific LA routes but the summary route.
Which set of configurations resolves the issue on the Chicago router?

A. router eigrp 100 summary-address 172.16.8.0 255.255.252.0

B. interface E 0/1 ip summary-address eigrp 100 172.16.8.0 255.255.252.0

C. router eigrp 100 summary-address 172.16.0.0 255.255.0.0

D. interface E 0/1 ip summary-address eigrp 100 172.16.0.0 255.255.0.0

Refer to the exhibit. An engineer must configure PBR on R1 to reach to 10.2.2.0/24 via R3 AS64513 as the primary path and a backup route through default route via R2 AS64513. All BGP routes are in the routing table of R1, but a static default route overrides BGP routes. Which PBR configuration achieves the objective?

A. access-list 100 permit ip 10.1.1.0 0.0.0.255 10.2.2.0 0.0.0.255 ! route-map PBR permit 10 match ip address 100 set ip next-hop recursive 10.3.3.1

B. access-list 100 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0 ! route-map PBR permit 10 match ip address 100 set ip next-hop recursive 10.3.3.1

C. access-list 100 permit ip 10.1.1.0 0.0.0.255 10.2.2.0 0.0.0.255 ! route-map PBR permit 10 match ip address 100 set ip next-hop 10.3.3.1

D. access-list 100 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0 ! route-map PBR permit 10 match ip address 100 set ip next-hop 10.3.3.1

Refer to the exhibit. When an FTP client attempts to use passive FTP to connect to the FTP server, the file transfers fail. Which action resolves the issue?

A. Modify traffic filter FTP-SERVER in to the outbound direction.

B. Configure active FTP traffic.

C. Configure to permit TCP ports higher than 1023.

D. Modify FTP-SERVER access list to remove established at the end.