Question 171
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap.
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
A. service timestamps log uptime
B. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
C. service timestamps log datetime localtime show-timezone
D. clock calendar-valid
Question 172
When provisioning a device in Cisco DNA Center, the engineer sees the error message `Cannot select the device. Not compatible with template`.
What is the reason for the error?
A. The template has an incorrect configuration.
B. The software version of the template is different from the software version of the device.
C. The changes to the template were not committed.
D. The tag that was used to filter the templates does not match the device tag.
Question 173
While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device.
Why is the image not uploading?
A. The device must be resynced to Cisco DNA Center.
B. The software image for the device is in install mode.
C. The device has lost connectivity to Cisco DNA Center.
D. The software image for the device is in bundle mode
Question 174
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install.
Which command must the engineer run to correct the configuration?
A. sudo maglev-config update
B. sudo maglev install config update
C. sudo maglev reinstall
D. sudo update config install
Question 175
DRAG DROP -Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPv3 categories on the right.
Select and Place:
Question 176
Refer to the exhibit. An administrator that is connected to the console does not see debug messages when remote users log in.
Which action ensures that debug messages are displayed for remote logins?
A. Enter the transport input ssh configuration command.
B. Enter the terminal monitor exec command.
C. Enter the logging console debugging configuration command.
D. Enter the aaa new-model configuration command.
Question 177
Refer to the exhibit. Network operations cannot read or write any configuration on the device with this configuration from the operations subnet.
Which two configurations fix the issue? (Choose two.)
A. Configure SNMP rw permission in addition to community ciscotest.
B. Modify access list 1 and allow operations subnet in the access list.
C. Modify access list 1 and allow SNMP in the access list.
D. Configure SNMP rw permission in addition to version 1.
E. Configure SNMP rw permission in addition to community ciscotest 1.
Question 178
Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?
A. The flow exporter is configured but is not used.
B. The flow monitor is applied in the wrong direction.
C. The flow monitor is applied to the wrong interface.
D. The destination of the flow exporter is not reachable.
Question 179
Refer to the exhibit. An engineer has successfully set up a floating static route from the BRANCH router to the HQ network using HQ_R1 as the primary default gateway. When the g0/0 goes down on HQ_R1, the branch network cannot reach the HQ network 192.168.20.0/24.
Which set of configurations resolves the issue?
A. HQ_R3(config)# ip sla responder HQ_R3(config)# ip sla responder icmp-echo 172.16.35.1
B. BRANCH(config)# ip sla 1 BRANCH(config-ip-sla)# icmp-echo 192.168.100.2
C. HQ_R3(config)# ip sla responder HQ_R3(config)# ip sla responder icmp-echo 172.16.35.5
D. BRANCH(config)# ip sla 1 BRANCH(config-ip-sla)# icmp-echo 192.168.100.1
Question 180
An engineer configured a DHCP server for Cisco IP phones to download its configuration from a TFTP server, but the IP phones failed to load the configuration.
What must be configured to resolve the issue?
A. BOOTP port 67
B. DHCP option 66
C. BOOTP port 68
D. DHCP option 69
