You have configured a single IPSec Cloud VPN tunnel for your organization to one of your customers. The VPN Tunnel Status is showing as Established; however the BGP Session Status is showing as BGP not configured. Your customer’s BGP settings are:
• Customer BGP address: 169.254.11.1/30
• Customer ASN: 64515
• Google Cloud BGP address: 169.254.11.2
• Google Cloud ASN: 64517
• MD5 Authentication: Disabled
You need to configure your local BGP session for this tunnel based on the settings provided by the third party customer. You have already associated the Cloud Router with the Cloud VPN Tunnel. What should you do?

A. Create a BGP session with these settings:
• Peer ASN: 64517
• Advertise Route Priority (MED): 100
• Local BGP IP: 169.254.11.2
• Peer BGP IP: 169.254.11.1
• MD5 Authentication: Disabled.
B. Create a BGP session with these settings:
• Peer ASN: 64515
• Advertise Route Priority (MED): 100
• Local BGP IP: 169.254.11.1
• Peer BGP IP: 169.254.11.2
• MD5 Authentication: Disabled.
C. Create a BGP session with these settings:
• Peer ASN: 64515
• Advertise Route Priority (MED): 100
• Local BGP IP: 169.254.11.2
• Peer BGP IP: 169.254.11.1
• MD5 Authentication: Disabled.
D. Create a BGP session with these settings:
• Peer ASN: 64515
• Advertise Route Priority (MED): 1000
• Local BGP IP: 169.254.11.2
• Peer BGP IP: 169.254.11.1
• MD5 Authentication: Enabled.