Question 51
An administrator connects an HP printer to a dot1x enable port, but the printer is nor accessible.Which feature must the administrator enable to access the printer?
A. change of authorization
B. MAC authentication bypass
C. TACACS authentication
D. RADIUS authentication
Question 52
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition.However, other groups that are in the same domain are seen.What is causing this issue?
A. Cisco ISE's connection to the AD join point is failing.
B. Cisco ISE only sees the built-in groups, not user created ones.
C. The groups are not added to Cisco ISE under the AD join point.
D. The groups are present but need to be manually typed as conditions.
Question 53
An engineer is implementing network access control using Cisco ISE and needs to separate the traffic based on the network device ID and use the IOS device sensor capability.Which probe must be used to accomplish this task?
A. NetFlow probe
B. HTTP probe
C. RADIUS probe
D. network scan probe
Question 54
What is an advantage of using EAP-TLS over EAP-MS-CHAPv2 for client authentication?
A. EAP-TLS uses a username and password for authentication to enhance security, while EAP-MS-CHAPv2 does not.
B. EAP-TLS uses multiple forms of authentication, while EAP-MS-CHAPv2 only uses one.
C. EAP-TLS uses a device certificate for authentication to enhance security, while EAP-MS-CHAPv2 does not.
D. EAP-TLS secures the exchange of credentials, while EAP-MS-CHAPv2 does not.
Question 55
What must be configured on the WLC to configure Central Web Authentication using Cisco ISE and a WLC?
A. Use the ip access-group webauth in command.
B. Use the radius-server vsa send authentication command.
C. Set the NAC State option to SNMP NAC.
D. Set the NAC State option to RADIUS NAC.
Question 56
A network administrator is configuring authorization policies in Cisco ISE. There is a requirement to use AD group assignments to control access to network resources. After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work.What is the cause of this issue?
A. The AD join point is no longer connected.
B. The certificate checks are not being conducted.
C. The network devices ports are shut down.
D. The AD DNS response time is slow.
Question 57
Refer to the exhibit.Which component must be configured to apply the SGACL?
A. secure server
B. host
C. egress router
D. ingress router
Question 58
A laptop was stolen and a network engineer added it to the block list endpoint identity group.What must be done on a new Cisco ISE deployment to redirect the laptop and restrict access?
A. Select DROP under If Auth fail within the authentication policy.
B. Ensure that access to port 8444 is allowed within the ACL.
C. Ensure that access to port 8443 is allowed within the ACL.
D. Select DenyAccess within the authentication policy.
Question 59
When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting.Which policy condition must be used in order to accomplish this?
A. Network Access NetworkDeviceName CONTAINS
B. DEVICE Device Type CONTAINS
C. Airespace Airespace-Wlan-Id CONTAINS
D. Radius Called-Station-ID CONTAINS
Question 60
A company manager is hosting a conference. Conference participants must connect to an open guest SSID and only use a preassigned code that they enter into the guest portal prior to gaining access to the network.How should the manager configure Cisco ISE to accomplish this goal?
A. Create logins for each participant to give them sponsored access.
B. Create entries in the guest identity group for all participants.
C. Create an access code to be entered in the AUP mode.
D. Create a registration code to be entered on the portal splash page.
