Win IT Exam with Last Dumps 2024

An engineer is designing a network deployment for a college with six buildings. Each building must have a WLC located in the IDF to support the APs. The wireless clients should be able to roam between the APs and the controllers. Which type of wireless architecture should be used?

A. cloud B. autonomous C. centralized D. distributed

A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

A. 802.11w B. 802.11r C. 802.11i D. 802.11k

An AP is receiving 802.
11 packets on its 802.
11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to Medium for 802.
11a. Which action does the AP take with the packets?

A. All frames are classified as non-Wi-Fi frames and are not decoded by the 5 GHz radio. B. Frames are decoded by the 2.4 GHz radio. C. All frames are classified as non-Wi-Fi frames and are not decoded by the 2.4 GHz radio. D. Frames are decoded by the 5 GHz radio.

What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

A. 20% B. 30% C. 40% D. 50%

Refer to the exhibit. Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

A. It presents the recommended number of APs for the selected coverage area based on the selections made. B. Planning mode requires a special license in Cisco Prime Infrastructure. C. It shows the map editor feature in Cisco Prime Infrastructure. D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work. E. It shows the planning mode feature in Cisco Prime Infrastructure.

An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)

A. TSPEC B. RXSOP C. TPC D. LSS E. DFS

A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?

A. 802.11w B. 802.11r C. 802.11i D. 802.11k

How are mobility groups created, excluding mobility anchors?

A. Each WLC must use the same mobility domain name and be defined as a peer in each other's static mobility members list. B. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair is considered separately as a mobility peer. C. The WLCs do not have to be of the same model or type to be a member of a mobility group; however, each member should be running different software versions. D. A mobility group does not require all WLCs in the group to use the same virtual IP address.

A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

A. 1 B. 2 C. 3 D. 4

What is the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller?

A. It is an IPsec tunnel with control path only. B. It is a CAPWAP tunnel with data path only. C. It is a CAPWAP tunnel with control path and data path. D. It is an IPsec tunnel with control path and data path.