Win IT Exam with Last Dumps 2024

Refer to the exhibit. AS65533 and AS65530 are announcing a partial Internet routing table as well as their IP subnets. An architect must create a design that ensures AS64512 does not become a transit AS. Which filtering solution must the architect choose?

A. no-advertise

B. next-hop

C. no-export

D. maximum-prefix

Refer to the exhibit. An architect must create a stable and scalable EIGRP solution for a customer. The design must: -conserve bandwidth, memory, and CPU processing -prevent suboptimal routingavoid any unnecessary queriesWhich two solutions must the architect select? (Choose two.)

A. route summarization

B. prefix lists

C. distribute lists

D. stub routing

E. static redistribution

Refer to the exhibit. An architect must design a solution to connect the two ASs. To optimize bandwidth, the design will implement load sharing between router R6 and router R1. Which solution should the design include?

A. Use update-source to specify the Loopback interface.

B. Use next-hop-self attributes only for routes that are learned from eBGP peers.

C. Configure the eBGP TTL to support eBGP multihop.

D. Use maximum-paths to install multiple paths in the routing table.

A customer's environment includes hosts that support IPv6-only. Several of these hosts must communicate with a public web server that has only IPv4 domain name resolution. Which solution should the customer use in this environment?

A. utilize NAT64 to translate the addresses

B. implement NAT44 at the edge of the customer network

C. use 6to4 and a tunnel to translate the addresses

D. implement 6PE to resolve hostname resolution

A company is planning to open two new branches and allocate the 2a01:c30:16:7009::3800/118 IPv6 network for the region. Each branch should have the capacity to accommodate a maximum of 200 hosts. Which two networks should the company use? (Choose two.)

A. 2a01:0c30:0016:7009::3a00/120

B. 2a01:0c30:0016:7009::3b00/121

C. 2a01:0c30:0016:7009::3a80/121

D. 2a01:0c30:0016:7009::3c00/120

E. 2a01:0c30:0016:7009::3b00/120

Refer to the exhibit.A network engineer must improve the current IS-IS environment. The Catalyst switch is equipped with dual supervisors. Each time a stateful switchover occurs, the network experiences unnecessary route recomputation. Which solution addresses this issue if the upstream router does not understand graceful restart messaging?

A. Enable IS-IS remote LFA FRR on both devices.

B. Enable NSR on the switch.

C. Enable NSF on the switch.

D. Configure ISIS aggressive timers on both devices.

Refer to the exhibit.An architect must design an IGP solution for an enterprise customer. The design must support: -Physical link flaps should have minimal impact. -Access routers should converge quickly after a link failure.Which two ISIS solutions should the architect include in the design? (Choose two.)

A. Use BGP to IS-IS redistribution to advertise all Internet routes in the Level 1 area.

B. Advertise the IS-IS interface and loopback IP address toward the Internet and data center.

C. Reduce SPF and PRC intervals to improve convergence time.

D. Configure all access and aggregate routers to establish Level 1 / Level 2 adjacencies across the network.

E. Configure access routers to establish a Level 1 adjacency and aggregate routers to establish a Level 1 / Level 2 adjacency.

Refer to the exhibit.An engineer is designing a routing solution for a customer. The design must ensure that a failure of network 10.1.0.0/24, 10.1.2.0/24, 10.2.1.0/24, or 10.2.3.0/24 does not impact the core. It also requires fast convergence time during any link failover in the core or access networks.Which solution must the engineer select?

A. Add aggregation layer between core and access networks.

B. Enable graceful restart on routers A and C.

C. Enable FRR for the connected networks of routers A and C.

D. Enable summarization on routers A and C.

Refer to the exhibit.A network engineer is designing a network for AS100. The design should ensure that all traffic enters AS100 via link 1 unless there is a network failure. In the event of a failure, link 2 should function as the path for incoming traffic. Which solution should the design include?

A. Modify the next-hop attribute on R3.

B. Use AS-Path prepending on R3.

C. Modify the next-hop attribute on R4.

D. Use AS-Path prepending on R4.

Refer to the exhibit.An architect must design a solution that uses the direct link between R1 and R2 for traffic from 10.10.10.0/24 toward network 10.10.20.0/24. Which solution should the architect include in the design?

A. Configure the OSPF cost of the link to a value lower than 30.

B. Lower the Administrative Distance for OSPF area 0.

C. Place the link into area 2 and install a new link between R1 and R2 in area 0.

D. Configure the link to provide multiarea adjacency.