Win IT Exam with Last Dumps 2025


Cisco 300-420 Exam

Page 15/18
Viewing Questions 141 150 out of 173 Questions
83.33%

Question 141
An engineer is working with NETCONF and Cisco NX-OS based devices. The engineer needs a YANG model that supports a specific feature relevant only toCisco NX-OS. Which model should the engineer choose?




Question 142
A client is moving to Model-Driven Telemetry and requires periodic updates. What must the network architect consider with this design?




Question 143
An infrastructure team is concerned about the shared memory utilization of a device, and for this reason, they need to monitor the device state. Which solution limits impact on the device and provides the required data?




Question 144
An engineer uses Postman and YANG to configure a router with:
- OSPF process ID 400
- network 192.168.128.128/25 enabled for Area 0
Which get-config reply verifies that the model set was designed correctly?
Image 300-420_144QA.png related to the Cisco 300-420 Exam Image 300-420_144QB.png related to the Cisco 300-420 Exam Image 300-420_144QC.png related to the Cisco 300-420 Exam Image 300-420_144QD.png related to the Cisco 300-420 Exam




Question 145
DRAG DROP -Drag and drop the characteristics from the left onto the configuration protocols they describe on the right.
Select and Place:
Image 300-420_145Q.jpg related to the Cisco 300-420 Exam
Image 300-420_145R.jpg related to the Cisco 300-420 Exam





Question 146
A company must automate a set of complex changes aligned with DR testing in the network. These changes are specific, and the DR playbook will be adjusted in the future. The playbook has diverse routing and switching assets in scope as well as multiple vendor and hardware platforms. A developer will create a thin, web front-end microservice and integrate with an Open Daylight controller to push changes to the network. Which YANG model should be used?




Question 147
An engineer uses Postman and YANG to configure a router with:
- OSPF process ID 200
- network 172.16.10.128/26 enabled for Area 0Which get-config reply verifies that the model set was designed correctly?
Image 300-420_147QA.png related to the Cisco 300-420 Exam Image 300-420_147QB.png related to the Cisco 300-420 Exam Image 300-420_147QC.png related to the Cisco 300-420 Exam Image 300-420_147QD.png related to the Cisco 300-420 Exam




Question 148
An architect must create a QoS solution for a customer to ensure that a 40 Mbps Internet connection is shared between four subnets based on these requirements:
* Each subnet must receive no less than 10 Mbps of download bandwidth during peak traffic times.
* A subnet can use up to 40 Mbps during nonpeak traffic times if the other subnets are idle.
* Download traffic must never experience a delay.
Which solution must the architect choose?




Question 149
An engineer is designing a network for a customer running a wireless network with a common VLAN for all APs. The customer is experiencing unicast flooding in the Layer 2 network between the aggregation and access layers. The customer wants to reduce the flooding and improve convergence time. Which solution meets these requirements?




Question 150
A network engineer must design a multicast solution to prevent the spoofing of multicast streams and ensure efficient bandwidth utilization. The network will be merged with another multicast domain in the future, and the merge must require minimum effort. Which two solutions meet the customer requirements? (Choose two.)