Win IT Exam with Last Dumps 2024


Cisco 300-410 Exam

Page 4/30
Viewing Questions 31 40 out of 298 Questions
13.33%

Question 31
Refer to the exhibit. The OSPF neighbor relationship is not coming up. What must be configured to restore OSPF neighbor adjacency?
Image 300-410_31Q.png related to the Cisco 300-410 Exam
A. matching hello timers
B. OSPF on the remote router
C. use router ID
D. matching mtu values

Question 32
An engineer configured two routers connected to two different service providers using BGP with default attributes. One of the links is presenting high delay, which causes slowness in the network. Which BGP attribute must the engineer configure to avoid using the high-delay ISP link if the second ISP link is up?
A. AS-PATH
B. WEIGHT
C. MED
D. LOCAL_PREF

Question 33
Refer to the exhibit. A network administrator redistributed the default static route into OSPF toward all internal routers to reach to Internet. Which set of commands restores reachability to the Internet by internal routers?
Image 300-410_33Q.png related to the Cisco 300-410 Exam
A. router ospf 1 redistribute static subnets
B. router ospf 1 network 0.0.0.0 0.0.0.0 area 0
C. router ospf 1 redistribute connected 0.0.0.0
D. router ospf 1 default-information originate

Question 34
Refer to the exhibit. The Math and Science departments connect through the corporate IT router, but users in the Math department must not be able to reach the Science department and vice versa. Which configuration accomplishes this task?
Image 300-410_34Q.png related to the Cisco 300-410 Exam
A. vrf definition Science address-family ipv4 ! interface E 0/2 ip address 192.168.1.1 255.255.255.0 no shut ! interface E 0/3 ip address 192.168.2.1 255.255.255.0 no shut
B. vrf definition Science address-family ipv4 ! interface E 0/2 vrf forwarding Science ip address 192.168.1.1 255.255.255.0 no shut ! interface E 0/3 vrf forwarding Science ip address 192.168.2.1 255.255.255.0 no shut
C. vrf definition Science address-family ipv4 ! interface E 0/2 ip address 192.168.1.1 255.255.255.0 vrf forwarding Science no shut ! interface E 0/3 ip address 192.168.2.1 255.255.255.0 vrf forwarding Science no shut
D. vrf definition Science ! interface E 0/2 ip address 192.168.1.1 255.255.255.0 no shut ! interface E 0/3 ip address 192.168.2.1 255.255.255.0 no shut

Question 35
Refer to the exhibit. The neighbor relationship is not coming up. Which two configurations bring the adjacency up? (Choose two.)
Image 300-410_35Q.png related to the Cisco 300-410 Exam
A. LA interface E 0/0 ip ospf authentication-key Cisco123
B. NY interface E 0/0 no ip ospf message-digest-key 1 md5 Cisco123 ip ospf authentication-key Cisco123
C. LA interface E 0/0 ip ospf message-digest-key 1 md5 Cisco123
D. LA router ospf 1 area 0 authentication message-digest
E. NY router ospf 1 area 0 authentication message-digest


Question 36
Refer to the exhibit. The network administrator configured redistribution on an ASBR to reach to all WAN networks but failed. Which action resolves the issue?
Image 300-410_36Q.png related to the Cisco 300-410 Exam
A. The route map EIGRP->OSPF must have the 10.0.106.0/24 entry to exist in one of the three prefix lists to pass
B. EIGRP must redistribute the 10.0.106.0/24 route instead of using the network statement
C. The OSPF process must have a metric when redistributing prefixes from EIGRP
D. The route map must have the keyword prefix-list to evaluate the prefix list entries

Question 37
Refer to the exhibit. An engineer configured R2 and R5 as route reflectors and noticed that not all routes are sent to R1 to advertise to the eBGP peers. Which iBGP routers must be configured as route reflectors to advertise all routes to restore reachability across all networks?
Image 300-410_37Q.png related to the Cisco 300-410 Exam
A. R1 and R4
B. R1 and R5
C. R4 and R5
D. R2 and R5

Question 38
Refer to the exhibits. SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up. Which configuration fixes the issue?
Image 300-410_38Q.png related to the Cisco 300-410 Exam
A. All Routers router ospf 1 auto-cost reference-bandwidth 100
B. SanFrancisco Router router ospf 1 auto-cost reference-bandwidth 1000
C. Boston Router router ospf 1 auto-cost reference-bandwidth 1000
D. All Routers router ospf 1 auto-cost reference-bandwidth 1000

Question 39
Refer to the exhibit. Troubleshoot and ensure that branch B only ever uses the MPLS B network to reach HQ.
Image 300-410_39Q.png related to the Cisco 300-410 Exam
A . Modify the weight of all HQ prefixes received at branch B from the MPLS B network to be higher than the weights used on the MPLS A network
B . Increase the local preference for all HQ prefixes received at branch B from the MPLS B network to be higher than the local preferences used on the MPLS A network
C . Introduce AS path prepending on the branch A MPLS B network connection so that any HQ advertisements from branch A toward the MPLS B network are prepended three times
D . Introduce an AS path filter on branch A routers so that only local prefixes are advertised into BGP

Question 40
Refer to the exhibit. The OSPF routing protocol is redistributed into the BGP routing protocol, but not all the OSPF routes are distributed into BGP. Which action resolves the issue?
Image 300-410_40Q.png related to the Cisco 300-410 Exam
A. Include the word external in the redistribute command
B. Use a route-map command to redistribute OSPF external routes defined in an access list
C. Include the word internal external in the redistribute command
D. Use a route-map command to redistribute OSPF external routes defined in a prefix list



Premium Version