Win IT Exam with Last Dumps 2024

An engineer configured SNMP notifications sent to the management server using authentication and encrypting data with DES. An error in the response PDU is received as "UNKNOWNUSERNAME, WRONGDIGEST".
Which action resolves the issue?

A. Configure the correct authentication password using SNMPv3 authNoPriv. B. Configure correct authentication and privacy passwords using SNMPv3 authPriv. C. Configure correct authentication and privacy passwords using SNMPv3 authNoPriv. D. Configure the correct authentication password using SNMPv3 authPriv.

Refer to the exhibit. A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center. The Catalyst 9300 is added successfully. However, the WLC is showing the error "uncontactable" when the administrator tries to add it in Cisco DNA Center.
Which action discovers WLC in Cisco DNA Center successfully?

A. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again. B. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices. C. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504. D. Copy the .pem file from the Cisco DNA Center on the USB and upload it to the WLC 3504.

Refer to the exhibit. A user cannot SSH to the router.
What action must be taken to resolve this issue?

A. Configure transport input ssh B. Configure transport output ssh C. Configure ip ssh version 2 D. Configure ip ssh source-interface loopback0

An engineer configured a Cisco router to send reliable and encrypted notifications for any events to the management server. It was noticed that the notification messages are reliable but not encrypted.
Which action resolves the issue?

A. Configure all devices for SNMPv3 informs with auth. B. Configure all devices for SNMPv3 informs with priv. C. Configure all devices for SNMPv3 traps with auth. D. Configure all devices for SNMPv3 traps with priv.

Refer to the exhibit. An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available.
How is this issue resolved?

A. Use the icmp-echo command to track both default routes. B. Use the same AD for both default routes. C. Start IP SLA by matching numbers for track and ip sla commands. D. Start IP SLA by defining frequency and scheduling it.

Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?

A. spanning-tree portfast bpduguard B. no spanning-tree uplinkfast C. spanning-tree backbonefast D. spanning-tree loopguard default

Refer to the exhibit. An engineer receives this error message when trying to access another router in-band from the serial interface connected to the console ofR1.
Which configuration is needed on R1 to resolve this issue?

A. R1(config)#line vty 0 R1(config-line)# transport output ssh B. R1(config)#line console 0 R1(config-line)# transport output ssh C. R1(config)#line console 0 R1(config-line)# transport preferred ssh D. R1(config)#line vty 0 R1(config-line)# transport output ssh R1(config-line)# transport preferred ssh

Refer to the exhibit. The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a newIP address.
What two actions must be taken to resolve this issue? (Choose two.)

A. Configure the server to use DHCP on the network with default gateway 200.30.40.100. B. Configure the server with a static IP address and default gateway. C. Configure the router to exclude a server IP address. D. Configure the server to use DHCP on the network with default gateway 200.30.30.100. E. Configure the router to exclude a server IP address and default gateway.

Refer to the exhibit. A user has set up an IP SLA probe to test if a non SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment.
The probe is failing.
Which action should the network administrator recommend for the probe to succeed?

A. Re-issue the ip sla schedule command. B. Add the control disable option to the tcp connect. C. Modify the ip sla schedule frequency to forever. D. Add icmp-echo command for the host.

Refer to the exhibit. A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYCInterface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in the exstart state.
How does the administrator fix this issue?

A. Configure to match the OSPF interface network types on both routers. B. Configure to match the OSPF interface speed and duplex settings on both routers. C. Configure to match the OSPF interface MTU settings on both routers. D. Configure to match the OSPF interface unique IP address and subnet mask on both routers.