Win IT Exam with Last Dumps 2024

Refer to the exhibit. The router R1 is in the process of being configured. Routers R2 and R3 are configured correctly for the new environment. Which two commands must be configured on R1 for PC1 to communicate to all PCs on the 10.10.10.0/24 network? (Choose two.)

A. ip route 10.10.10.0 255.255.255.0 192.168.2.3

B. ip route 10.10.10.10 255.255.255.255 192.168.2.2

C. ip route 10.10.10.10 255.255.255.255 g0/1

D. ip route 10.10.10.8 255.255.255.248 g0/1

E. ip route 10.10.10.0 255.255.255.248 192.168.2.2

Refer to the exhibit. Traffic from R1 to the 10.10.2.0/24 subnet uses 192.168.1.2 as its next hop. A network engineer wants to update the R1 configuration so that traffic with destination 10.10 2.1 passes through router R3, and all other traffic to the 10.10.2.0/24 subnet passes through R2. Which command must be used?

A. ip route 10.10.2.1 255.255.255.255 192.168.1.4115

B. ip route 10.10.2.0 255.255.255.0 192.168.1.4115

C. ip route 10.10.2.0 255.255.255.0 192.168.1.4100

D. ip route 10.10.2.1 255.255.255.255192.168.1.4100

Refer to the exhibit. The image server and client A are running an application that transfers an extremely high volume of data between the two. An engineer is configuring a dedicated circuit between R1 and R2. Which set of commands must the engineer apply to the routers so that only traffic between the image server and client A is forces to use the new circuit?

A. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.6 R2(config)#ip route 192.168.0.100 255.255.255.255 10.10.10.5

B. R1(config)#ip route 10.10.13.10 255.255.255.128 10.10.10.6 R2(config)#lp route 192.168.0.100 255.255.255.0 10.10.10.5

C. R1(config)#ip route 10.10.13.10 255.255.255.252 10.10.10.6 R2(config)#tp route 192.168.0.100 255.255.255.252 10.10.10.5

D. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.2 R2(config)#ip route 192.168.0.100 255.255.255.255 10.10.10.1

Refer to the exhibit. An OSPF neighbor relationship must be configured using these guidelines:
- R1 is only permitted to establish a neighbor with R2.
- R1 will never participate in DR elections.
- R1 will use a router-id of R1 will use a router-id of 10.1.1.1.
Which configuration must be used?

A.

B.

C.

D.

Refer to the exhibit. After applying this configuration to router R1, a network engineer is verifying the implementation. If all links are operating normally, and the engineer sends a series of packets from PC1 to PC3, how are the packets routed?

A. They are distributed sent round robin to interfaces S0/0/0 and S0/0/1

B. They are routed to 10.0.0.2

C. They are routed to 192.168.100.2

D. They are routed to 172.16.20.2

Refer to the exhibit. When router R1 receives a packet with destination IP address 10.56.0.62, through which interface does it route the packet?

A. Vlan58

B. Null0

C. Vlan59

D. Vlan60

Refer to the exhibit. How much OSPF be configured on the GigabitEthernet0/0 interface of the neighbor device to achieve the destined neighbor relationship?

A. Router(config)#interface GigabitEthernet 0/0 Router(config-if)#ip ospf cost 5

B. Router(config)#interface GigabitEthernet 0/0 Router(config-if)#ip ospf priority 1

C. Router(config)#interface GigabitEthernet 0/0 Router(config-if)#ip ospf area 2

D. Router(config)#interface GigabitEthernet 0/0 Router(config-if)#ip ospf network point-to-point

An engineer just installed network 10.120.10.0/24. Which configuration must be applied to the R14 router to add the new network to its OSPF routing table?

A. Router ospf 100 Network 10.120.10.0 0.0.0.255 area 0

B. Router ospf 120 Network 10.120.10.0 255.255.255.0 area 0 Ip route 10.120.10.0 255.255.255.0 fa0/1

C. Router ospf 100 area 0 Network 10.120.10.0 0.0.0.255

D. Router ospf 100 Network 10.120.10.0 255.255.255.0 area 0

By default, which virtual MAC address does HSRP group 14 use?

A. 00:05:5e:19:0c:14

B. 00:05:0c:07:ac:14

C. 04:15:26:73:3c:0e

D. 00:00:0c:07:ac:0e

Refer to the exhibit. Router R1 is added to the network and configured with the 10.0.0.64/26 and 10.0.20.0/26 subnets. However, traffic destined for the LAN on R3 is not accessible. Which command when executed on R1 defines a static route to reach the R3 LAN?

A. ip route 10.0.0.64 255.255.255.192 10.0.20.3

B. ip route 10.0.15.0 255.255.255.0 10.0.20.1

C. ip route 10.0.15.0 255.255.255.192 10.0.20.1

D. ip route 10.0.15.0 255.255.255.0 10.0.20.3