Refer to the exhibit. Load-balanced traffic is coming in from the WAN destined to a host at 172.16.1.190. Which next-hop is used by the router to forward the request?
A. 192.168.7.4
B. 192.168.7.7
C. 192.168.7.35
D. 192.168.7.40
Question 522
Refer to the exhibit. An engineer is asked to configure router R1 so that it forms an OSPF single-area neighbor relationship with R2. Which command sequence must be implemented to configure the router?
A.
B.
C.
D.
Question 523
An engineer is installing a new wireless printer with a static IP address on the Wi-Fi network. Which feature must be enabled and configured to prevent connection issues with the printer?
A. client exclusion
B. passive client
C. DHCP address assignment
D. static IP tunneling
Question 524
Refer to the exhibit. All routers in the network are configured. R2 must be the DR. After the engineer connected the devices, R1 was elected as the DR. Which command sequence must be configured on R2 to be elected as the DR in the network?
A. R2(config)#intergface gi0/0 R2(config-if)#ip ospf priority 100
B. R2(config)#router ospf 1 R2(config-router)#router-id 192.168.2.7
C. R2(config)#router ospf 1 R2(config-router)#router-id 10.100.100.100
D. R2(config)#intergface gi0/0 R2(config-if)#ip ospf priority 1
Question 525
Refer to the exhibit Routers R1 and R2 have been configured with their respective LAN interfaces The two circuits are operational and reachable across WAN. Which command set establishes failover redundancy if the primary circuit goes down?
A.
B.
C.
D.
Question 526
What is the MAC address used with VRRP as a virtual address?
A. 00-00-0C-07-AD-89
B. 00-00-5E-00-01-0a
C. 00-07-C0-70-AB-01
D. 00-C6-41-93-90-91
Question 527
Which type of traffic Is sent with pure iPsec?
A. broadcast packets from a switch that is attempting to locate a MAC address at one of several remote sites
B. multicast traffic from a server at one site to hosts at another location
C. spanning-tree updates between switches that are at two different sites
D. unicast messages from a host at a remote site to a server at headquarters
Question 528
Refer to the exhibit. A packet is being sent across router R1 to host 172.16.3.14. To which destination does the router send the packet?
A. 207.165.200.246 via Serial0/1/0
B. 207.165.200.254 via Serial0/0/0
C. 207.165.200.250 via Serial0/0/0
D. 207.165.200.254 via Serial0/0/1
Question 529
Refer to the exhibit. 1. Configure R1 and R2 Router IDs using the interface IP addresses from the link that is shared between them. 2. Configure the R2 links with a max value facing R1 and R3. R2 must become the DR. R1 and R3 links facing R2 must remain with the default OSPF configuration for DR election. Verify the configuration after clearing the OSPF process. 3. Using a host wildcard mask, configure all three routers to advertise their respective Loopback1 networks. 4. Configure the link between R1 and R3 to disable their ability to add other OSPF routers.
Question 530
Refer to the exhibit. If RTR01 is configured as shown, which three addresses will be received by other routers that are running EIGRP on the network? (Choose three.)
