Win IT Exam with Last Dumps 2025

A DHCP pool has been created with the name CONTROL. The pool uses the next to last usable IP address as the default gateway for the DHCP clients. The server is located at 172.16.32.15. What is the next step in the process for clients on the 192.168.52.0/24 subnet to reach the DHCP server?

A. ip helper-address 172.16.32.15 B. ip default-gateway 192.168.52.253 C. ip forward-protocol udp 137 D. ip detault-network 192.168.52.253

DRAG DROP -Drag and drop the Qos features from the left onto the corresponding statements on the right.

Refer to the exhibit.
Which configuration enables DHCP addressing for hosts connected to interface FastEthernet0/1 on router R3?

A. interface FastEthernet0/1
ip helper-address 10.0.1.1
!
access-list 100 permit tcp host 10.0.1.1 eq 67 host 10.148.2.1 B. interface FastEthernet0/1
ip helper-address 10.0.1.1
!
access-list 100 permit udp host 10.0.1.1 eq 67 host 10.148.2.1 C. interface FastEthernet0/0
ip helper-address 10.0.1.1
!
access-list 100 permit host 10.0.1.1 host 10.148.2.1 eq bootps D. interface FastEthernet0/1
ip helper-address 10.0.1.1
!
access-list 100 permit udp host 10.0.1.1 eq bootps host 10.148.2.1

DRAG DROP -Drag and drop the steps in a standard DNS lookup operation from the left into the order on the right.

Which two features introduced in SNMPv2 provide the ability to retrieve large amounts of data in one request and acknowledge a trap using PDUs? (Choose two.)

A. Get B. GetNext C. Set D. GetBulk E. Inform

DRAG DROP -Drag and drop the DNS commands from the left onto their effects on the right.

What is the purpose of configuring different levels of syslog for different devices on the network?

A. to set the severity of syslog messages from each device B. to control the number of syslog messages from different devices that are stored locally C. to identify the source from which each syslog message originated D. to rate-limit messages for different severity levels from each device

Refer to the exhibit. The DHCP server is configured with a DHCP pool for each of the subnets represented.
Which command must be configured on switch SW1 to allow DHCP clients on VLAN 10 to receive dynamic IP addresses from the DHCP server?

A. SW1(config-if)#ip helper-address 192.168.10.1 B. SW1(config-if)#ip helper-address 192.168.20.1 C. SW1(config-if)#ip helper-address 192.168.20.2 D. SW1(config-if)#ip helper-address 192.168.10.2

DRAG DROP -Drag and drop the DNS lookup commands from the left onto the functions on the right.

Refer to the exhibit.
Which minimum configuration items are needed to enable Secure Shell version 2 access to R15?

A. Router(config)#hostname R15 -
R15(config)#ip domain-name cisco.com
R15(config)#crypto key generate rsa general-keys modulus 1024

R15(config)#ip ssh version 2 -

R15(config-line)#line vty 0 15 -
R15(config-line)# transport input ssh B. Router(config)#crypto key generate rsa general-keys modulus 1024

Router(config)#ip ssh version 2 -
Router(config-line)#line vty 015
Router(config-line)# transport input ssh
Router(contig)#ip ssh logging events
R15(config)#ip ssh stricthostkeycheck C. Router(config)#hostname R15 -
R15(config)#crypto key generate rsa general-keys modulus 1024

R15(config-line)#line vty 0 15 -
R15(config-line)# transport input ssh
R15(config)#ip ssh source-interface Fa0/0
R15(config)#ip ssh stricthostkeycheck D. Router(config)#ip domain-name cisco.com
Router(config)#crypto key generate rsa general-keys modulus 1024

Router(contig)#ip ssh version 2 -
Router(config-line)#line vty 0 15
Router(config-line)# transport input all
Router(config)#ip ssh logging events