Win IT Exam with Last Dumps 2024


Microsoft AZ-104 Exam

Page 7/55
Viewing Questions 61 70 out of 549 Questions
12.73%

Question 61
You need to recommend a solution to automate the configuration for the finance department users. The solution must meet the technical requirements.
What should you include in the recommendation?
A. Azure AD B2C
B. dynamic groups and conditional access policies
C. Azure AD Identity Protection
D. an Azure logic app and the Microsoft Identity Management (MIM) client
Scenario: Ensure Azure Multi-Factor Authentication (MFA) for the users in the finance department only.
The recommendation is to use conditional access policies that can then be targeted to groups of users, specific applications, or other conditions.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-userstates

Question 62
HOTSPOT -
You have an Azure subscription that contains a virtual network named VNET1 in the East US 2 region. A network interface named VM1-NI is connected to
VNET1.
You successfully deploy the following Azure Resource Manager template.
AZ-104_62Q_1.jpg related to the Microsoft AZ-104 Exam
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_62Q_2.png related to the Microsoft AZ-104 Exam
Image AZ-104_62R.png related to the Microsoft AZ-104 Exam
Box 1: Yes -
Box 2: Yes -
VM1 is in Zone1, while VM2 is on Zone2.
Box 3: No -
Reference:
https://docs.microsoft.com/en-us/azure/architecture/resiliency/recovery-loss-azure-region

Question 63
You have an Azure subscription named Subscription1. Subscription1 contains the resource groups in the following table.
AZ-104_63Q.png related to the Microsoft AZ-104 Exam
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2.
What is the effect of the move?
A. The App Service plan for WebApp1 remains in West Europe. Policy2 applies to WebApp1.
B. The App Service plan for WebApp1 moves to North Europe. Policy2 applies to WebApp1.
C. The App Service plan for WebApp1 remains in West Europe. Policy1 applies to WebApp1.
D. The App Service plan for WebApp1 moves to North Europe. Policy1 applies to WebApp1.
You can move an app to another App Service plan, as long as the source plan and the target plan are in the same resource group and geographical region.
The region in which your app runs is the region of the App Service plan it's in. However, you cannot change an App Service plan's region.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/app-service-plan-manage

Question 64
HOTSPOT -
You have an Azure subscription named Subscription1 that has a subscription ID of c276fc76-9cd4-44c9-99a7-4fd71546436e.
You need to create a custom RBAC role named CR1 that meets the following requirements:
- Can be assigned only to the resource groups in Subscription1
- Prevents the management of the access permissions for the resource groups
- Allows the viewing, creating, modifying, and deleting of resources within the resource groups
What should you specify in the assignable scopes and the permission elements of the definition of CR1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_64Q.jpg related to the Microsoft AZ-104 Exam
Image AZ-104_64R.jpg related to the Microsoft AZ-104 Exam
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/custom-roles
https://docs.microsoft.com/en-us/azure/role-based-access-control/resource-provider-operations#microsoftresources

Question 65
You have an Azure subscription.
Users access the resources in the subscription from either home or from customer sites. From home, users must establish a point-to-site VPN to access the Azure resources. The users on the customer sites access the Azure resources by using site-to-site VPNs.
You have a line-of-business-app named App1 that runs on several Azure virtual machine. The virtual machines run Windows Server 2016.
You need to ensure that the connections to App1 are spread across all the virtual machines.
What are two possible Azure services that you can use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. an internal load balancer
B. a public load balancer
C. an Azure Content Delivery Network (CDN)
D. Traffic Manager
E. an Azure Application Gateway
Network traffic from the VPN gateway is routed to the cloud application through an internal load balancer. The load balancer is located in the front-end subnet of the application.
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/vpn
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview
https://docs.microsoft.com/en-us/azure/application-gateway/overview


Question 66
You have an Azure subscription.
You have 100 Azure virtual machines.
You need to quickly identify underutilized virtual machines that can have their service tier changed to a less expensive offering.
Which blade should you use?
A. Monitor
B. Advisor
C. Metrics
D. Customer insights
Advisor helps you optimize and reduce your overall Azure spend by identifying idle and underutilized resources. You can get cost recommendations from the Cost tab on the Advisor dashboard.
Reference:
https://docs.microsoft.com/en-us/azure/advisor/advisor-cost-recommendations

Question 67
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant.
You need to create a conditional access policy that requires all users to use multi-factor authentication when they access the Azure portal.
Which three settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_67Q.png related to the Microsoft AZ-104 Exam
Image AZ-104_67R.png related to the Microsoft AZ-104 Exam
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/app-based-mfa

Question 68
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
The User administrator role is assigned to a user named Admin1.
An external partner has a Microsoft account that uses the [email protected] sign in.
Admin1 attempts to invite the external partner to sign in to the Azure AD tenant and receives the following error message: `Unable to invite user [email protected] - Generic authorization exception.`
You need to ensure that Admin1 can invite the external partner to sign in to the Azure AD tenant.
What should you do?
A. From the Users settings blade, modify the External collaboration settings.
B. From the Custom domain names blade, add a custom domain.
C. From the Organizational relationships blade, add an identity provider.
D. From the Roles and administrators blade, assign the Security administrator role to Admin1.
Reference:
https://techcommunity.microsoft.com/t5/Azure-Active-Directory/Generic-authorization-exception-inviting-Azure-AD-gests/td-p/274742

Question 69
You have an Azure subscription linked to an Azure Active Directory tenant. The tenant includes a user account named User1.
You need to ensure that User1 can assign a policy to the tenant root management group.
What should you do?
A. Assign the Owner role for the Azure Subscription to User1, and then modify the default conditional access policies.
B. Assign the Owner role for the Azure subscription to User1, and then instruct User1 to configure access management for Azure resources.
C. Assign the Global administrator role to User1, and then instruct User1 to configure access management for Azure resources.
D. Create a new management group and delegate User1 as the owner of the new management group.
The following chart shows the list of roles and the supported actions on management groups.
AZ-104_69E.png related to the Microsoft AZ-104 Exam
Note:
Each directory is given a single top-level management group called the "Root" management group. This root management group is built into the hierarchy to have all management groups and subscriptions fold up to it. This root management group allows for global policies and Azure role assignments to be applied at the directory level. The Azure AD Global Administrator needs to elevate themselves to the User Access Administrator role of this root group initially. After elevating access, the administrator can assign any Azure role to other directory users or groups to manage the hierarchy. As administrator, you can assign your own account as owner of the root management group.
Reference:
https://docs.microsoft.com/en-us/azure/governance/management-groups/overview

Question 70
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the groups in the following table.
AZ-104_70Q_1.jpg related to the Microsoft AZ-104 Exam
You create two user accounts that are configured as shown in the following table.
AZ-104_70Q_2.png related to the Microsoft AZ-104 Exam
Of which groups are User1 and User2 members? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_70Q_3.png related to the Microsoft AZ-104 Exam
Image AZ-104_70R.png related to the Microsoft AZ-104 Exam
Box 1: Group 1 only -
First rule applies -
Box 2: Group1 and Group2 only -
Both membership rules apply.
Reference:
https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/create-collections



Premium Version