Win IT Exam with Last Dumps 2024


Microsoft AZ-104 Exam

Page 40/55
Viewing Questions 391 400 out of 549 Questions
72.73%

Question 391
HOTSPOT -
You have an Azure subscription that contains the public load balancers shown in the following table.
AZ-104_391Q_1.png related to the Microsoft AZ-104 Exam
You plan to create six virtual machines and to load balance requests to the virtual machines. Each load balancer will load balance three virtual machines.
You need to create the virtual machines for the planned solution.
How should you create the virtual machines? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_391Q_2.jpg related to the Microsoft AZ-104 Exam
Image AZ-104_391R.jpg related to the Microsoft AZ-104 Exam
Box 1: be created in the same availability set or virtual machine scale set.
The Basic tier is quite restrictive. A load balancer is restricted to a single availability set, virtual machine scale set, or a single machine.
Box 2: be connected to the same virtual network
The Standard tier can span any virtual machine in a single virtual network, including blends of scale sets, availability sets, and machines.
Reference:
https://www.petri.com/comparing-basic-standard-azure-load-balancers

Question 392
HOTSPOT -
You have an on-premises data center and an Azure subscription. The data center contains two VPN devices. The subscription contains an Azure virtual network named VNet1. VNet1 contains a gateway subnet.
You need to create a site-to-site VPN. The solution must ensure that if a single instance of an Azure VPN gateway fails, or a single on-premises VPN device fails, the failure will not cause an interruption that is longer than two minutes.
What is the minimum number of public IP addresses, virtual network gateways, and local network gateways required in Azure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_392Q.jpg related to the Microsoft AZ-104 Exam
Image AZ-104_392R.jpg related to the Microsoft AZ-104 Exam
Box 1: 4 -
Two public IP addresses in the on-premises data center, and two public IP addresses in the VNET.
The most reliable option is to combine the active-active gateways on both your network and Azure, as shown in the diagram below.
AZ-104_392E.png related to the Microsoft AZ-104 Exam
Box 2: 2 -
Every Azure VPN gateway consists of two instances in an active-standby configuration. For any planned maintenance or unplanned disruption that happens to the active instance, the standby instance would take over (failover) automatically, and resume the S2S VPN or VNet-to-VNet connections.
Box 3: 2 -
Dual-redundancy: active-active VPN gateways for both Azure and on-premises networks
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-highlyavailable

Question 393
You have an Azure subscription that contains two virtual machines as shown in the following table.
AZ-104_393Q.png related to the Microsoft AZ-104 Exam
You perform a reverse DNS lookup for 10.0.0.4 from VM2.
Which FQDN will be returned?
A. vm1.core.windows.net
B. vm1.azure.com
C. vm1.westeurope.cloudapp.azure.com
D. vm1.internal.cloudapp.net

Question 394
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an app named App1 that is installed on two Azure virtual machines named VM1 and VM2. Connections to App1 are managed by using an Azure Load
Balancer.
The effective network security configurations for VM2 are shown in the following exhibit.
AZ-104_394Q.jpg related to the Microsoft AZ-104 Exam
You discover that connections to App1 from 131.107.100.50 over TCP port 443 fail.
You verify that the Load Balancer rules are configured correctly.
You need to ensure that connections to App1 can be established successfully from 131.107.100.50 over TCP port 443.
Solution: You create an inbound security rule that allows any traffic from the AzureLoadBalancer source and has a cost of 150.
Does this meet the goal?
A. Yes
B. No
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview

Question 395
You have an Azure subscription that contains a policy-based virtual network gateway named GW1 and a virtual network named VNet1.
You need to ensure that you can configure a point-to-site connection from an on-premises computer to VNet1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Add a service endpoint to VNet1
B. Reset GW1
C. Create a route-based virtual network gateway
D. Add a connection to GW1
E. Delete GW1
F. Add a public IP address space to VNet1
C: A VPN gateway is used when creating a VPN connection to your on-premises network.
Route-based VPN devices use any-to-any (wildcard) traffic selectors, and let routing/forwarding tables direct traffic to different IPsec tunnels. It is typically built on router platforms where each IPsec tunnel is modeled as a network interface or VTI (virtual tunnel interface).
E: Policy-based VPN devices use the combinations of prefixes from both networks to define how traffic is encrypted/decrypted through IPsec tunnels. It is typically built on firewall devices that perform packet filtering. IPsec tunnel encryption and decryption are added to the packet filtering and processing engine.
Incorrect Answers:
F: Point-to-Site connections do not require a VPN device or a public-facing IP address.
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/create-routebased-vpn-gateway-portal
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-connect-multiple-policybased-rm-ps


Question 396
HOTSPOT -
You have an Azure subscription that contains the resources in the following table:
AZ-104_396Q_1.png related to the Microsoft AZ-104 Exam
In Azure, you create a private DNS zone named adatum.com. You set the registration virtual network to VNet2. The adatum.com zone is configured as shown in the following exhibit:
AZ-104_396Q_2.png related to the Microsoft AZ-104 Exam
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_396Q_3.jpg related to the Microsoft AZ-104 Exam
Image AZ-104_396R.jpg related to the Microsoft AZ-104 Exam
Box 1: No -
Azure DNS provides automatic registration of virtual machines from a single virtual network that's linked to a private zone as a registration virtual network. VM5 does not belong to the registration virtual network though.
Box 2: No -
Forward DNS resolution is supported across virtual networks that are linked to the private zone as resolution virtual networks. VM5 does belong to a resolution virtual network.
Box 3: Yes -
VM6 belongs to registration virtual network, and an A (Host) record exists for VM9 in the DNS zone.
By default, registration virtual networks also act as resolution virtual networks, in the sense that DNS resolution against the zone works from any of the virtual machines within the registration virtual network.
Reference:
https://docs.microsoft.com/en-us/azure/dns/private-dns-overview

Question 397
HOTSPOT -
You have an Azure subscription that contains the virtual networks shown in the following table.
AZ-104_397Q_1.png related to the Microsoft AZ-104 Exam
The subscription contains the private DNS zones shown in the following table.
AZ-104_397Q_2.png related to the Microsoft AZ-104 Exam
You add virtual network links to the private DNS zones as shown in the following table.
AZ-104_397Q_3.png related to the Microsoft AZ-104 Exam
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_397Q_4.png related to the Microsoft AZ-104 Exam
Image AZ-104_397R.png related to the Microsoft AZ-104 Exam
Reference:
https://docs.microsoft.com/en-us/azure/dns/private-dns-virtual-network-links
https://docs.microsoft.com/en-us/azure/dns/private-dns-autoregistration

Question 398
HOTSPOT -
You have an Azure subscription.
You plan to use an Azure Resource Manager template to deploy a virtual network named VNET1 that will use Azure Bastion.
How should you complete the template? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-104_398Q.png related to the Microsoft AZ-104 Exam
Image AZ-104_398R.png related to the Microsoft AZ-104 Exam
Reference:
https://medium.com/charot/deploy-azure-bastion-preview-using-an-arm-template-15e3010767d6

Question 399
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a packet capture.
Does this meet the goal?
A. Yes
B. No
Network Watcher variable packet capture allows you to create packet capture sessions to track traffic to and from a virtual machine. Packet capture helps to diagnose network anomalies both reactively and proactively. Other uses include gathering network statistics, gaining information on network intrusions, to debug client-server communications and much more.
Reference:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-packet-capture-overview

Question 400
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a connection monitor.
Does this meet the goal?
A. Yes
B. No
Reference:
https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connection-monitor-in-all-public-regions/



Premium Version