Question 121
What is required for Cisco UCM to accept SIP calls with a URI in the format of `sip:[email protected]`?
A. Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.
B. Set the SIPS URI Handling to True in CallManager Service Parameters.
C. Define Cluster Fully Qualified Domain Name under Servers in Cisco UCM.
D. Define Cluster Fully Qualified Domain Name in Enterprise Parameters.
Question 122
An administrator installed a Cisco Unified IP 8831 Conference Phone that is failing to register. Which two actions should be taken to troubleshoot the problem?(Choose two.)
A. Verify that the switch port of the phone is enabled.
B. Check the RJ-65 cable.
C. Verify that the phone's network can access the option 150 server.
D. Verify that the RJ-11 cable is plugged into the PC port.
E. Disable HSRP on the access layer switch.
Question 123
A Cisco UCM administrator wants to enable the Self-Provisioning feature for end users. Which two prerequisites must be met first? (Choose two.)
A. End users must have a primary extension.
B. End users must be associated to a user profile or feature group template that includes a universal line template and universal device template.
C. End users must have a secondary extension.
D. End users must belong to Standard CCM Admin Users group, the Standard CCM End Users group, and the Standard CCM Self-Provisioning group.
E. Cisco Extended Functions service must be running.
Question 124
An administrator executes the debug isdn q931 command while debugging a failed call. After a test call is placed, the logs return a disconnect cause code of 1.What is the cause of this problem?
A. The dialed number is not assigned to an endpoint.
B. The destination number rejects the call.
C. The destination number is busy.
D. The media resource is unavailable.
Question 125
Where in Cisco UCM are codec negotiations configured for endpoints?
A. under device profiles in device settings
B. in in-service parameters
C. in enterprise parameters
D. under regions using preference lists Most Voted
Question 126
An engineer configures a Cisco Unified Border Element and must ensure that the codecs negotiated meet the ITSP requirements. The ITSP supports G.711ulaw and G.729 for audio and H.264 for video. The preferred voice codec is G.711. Which configuration meets this requirement?
A.
B.
C.
D.
Question 127
What is a characteristic of a SIP endpoint configured in Cisco UCM with "Use Trusted Relay Point" set to "On"?
A. It enables Cisco UCM to insert an MTP or transcoder designated as a TRP.
B. It enables the Use Trusted Relay Point setting from the associated common device configuration.
C. If TRP is allocated and MTP is also required for the endpoint, calls fail.
D. It creates a trust relationship with the called party.
Question 128
Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers?
A. Endpoints attempt to register with both subscribers in a load-balanced method.
B. Endpoints attempt to register with the bottom subscriber in the list.
C. Endpoints attempt to register with the top subscriber in the list.
D. If a subscriber is rebooted, endpoints deregister until the rebooted system is back in service.
Question 129
A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.Which IOS entry sets the required priority?
A. dtmf-relay rtp-nte sip-notify
B. dtmf-relay cisco-rtp
C. sip-notify dtmf-relay rtp-nte
D. dtmf-relay sip-kpml cisco-rtp
Question 130
A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified Communications Manager SIP trunk. Which media resource can be leveraged to interwork this mismatch?
A. Conference Bridge
B. Trusted Relay Point
C. Media Termination Point
D. Annunciator
