Win IT Exam with Last Dumps 2025

Refer to the exhibit. Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped.
Which configuration must the engineer apply to the two routers to implement session protection on the link?

A.

B.

C.

D.

Refer to the exhibit. A network operator working for a telecommunication company with an employee id: 1234:56:789 is implementing a Cisco Unified MPLS solution. What is the effect of this implementation?

A. BGP is deployed between the PEs and ABRs with RFC 9107.

B. EIGRP is deployed between the PEs and ABRs with RFC 9107.

C. OSPF is deployed between the PEs and ABRs with RFC 3107.

D. IS-IS is deployed between the PEs and ABRs with RFC 3107.

A network engineer is configuring a newly installed PE router at the regional gateway location. The new PE router must use MPLS core routing protocols with the existing P router, and LDP sessions between the two routers must be protected to provide faster MPLS convergence.
Which configuration must the engineer perform on the network so that LDP sessions are established?

A. Enable RSVP-TE FRR on the LDP interface to protect the LDP session between routers.

B. Enable communication over TCP port 646 T-LDP hello messages.

C. Set the LDP session protection timer on each router to the same value.

D. Enable LDP session protection on either one of the routers, which allows them to autonegotiate.

Refer to the exhibit. If router RA is configured as shown, which IPv4 multicast address space does it use?

A. 224.0.0.0/8

B. 225.0.0.0/8

C. 232.0.0.0/8

D. 239.0.0.0/8

DRAG DROP -Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Select and Place:

Refer to the exhibit. You are configuring an administrative domain in the given multi-vendor environment with PIM-SM.
Which feature can you implement so that devices can dynamically learn the RP?

A. BSR

B. BIDIR-PIM

C. Auto-RP

D. SSM

DRAG DROP -Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Select and Place:

Refer to the exhibit. Which command is used to complete this configuration for QoS class-based marking?

A. PE-A(config-pmap-c)#set dscp ef

B. PE-A(config-pmap-c)#priority

C. PE-A(config-pmap-c)#random-detect

D. PE-A(config-pmap-c)#fair-queue

What causes multicast traffic to permanently stay on the shared tree and not switch to the source tree?

A. SSM range is being used

B. The RP announcements are being filtered

C. The SPT threshold is set to infinity

D. The RP IP address is configured incorrectly

Refer to the exhibit. An engineer configured multicast routing on client's network. What is the effect of this multicast implementation?

A. R2 is unable to share information because the ip pim autorp listener command is missing

B. R1 floods information about R2 throughout the multicast domain

C. R2 floods information about R1 throughout the multicast domain

D. R2 is elected as the RP for this domain