Win IT Exam with Last Dumps 2024

Refer to the exhibit.MTU has been configured on the underlying physical topology, and no MTU command has been configured on the tunnel interfaces.What happens when a 1500-byte IPv4 packet traverses the GRE tunnel from host X to host Y, assuming the DF bit is cleared?

A. The packet is discarded on router B B. The packet arrives on router C without fragmentation C. The packet arrives on router C fragmented D. The packet is discarded on router A

Which entity is responsible for maintaining Layer 2 isolation between segments in a VXLAN environment?

A. VNID B. switch fabric C. VTEP D. host switch

What is an emulated machine that has dedicated compute, memory, and storage resources and a fully installed operating system?

A. mainframe B. host C. virtual machine D. container

DRAG DROP -Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.Select and Place:

Which technology does VXLAN use to provide segmentation for Layer 2 and Layer 3 traffic?

A. bridge domain B. VLAN C. VNI Most Voted D. VRF

Refer to the exhibit. An engineer must assign an IP address of 192.168.1.1/24 to the GigabitEthernet1 interface. Which two commands must be added to the existing configuration to accomplish this task? (Choose two.)

A. Router(config-if)#ip address 192.168.1.1 255.255.255.0 Most Voted B. Router(config-vrf)#address-family ipv4 Most Voted C. Router(config-vrf)#ip address 192.168.1.1 255.255.255.0 D. Router(config-if)#address-family ipv4 E. Router(config-vrf)#address-family ipv6

The following system log message is presented after a network administrator configures a GRE tunnel:%TUN-RECURDOWN Interface Tunnel 0 temporarily disabled due to recursive routingWhy is Tunnel 0 disabled?

A. Because dynamic routing is not enabled. B. Because the tunnel cannot reach its tunnel destination. C. Because the best path to the tunnel destination is through the tunnel itself. D. Because the router cannot recursively identify its egress forwarding interface.

What is a benefit of using a Type 2 hypervisor instead of a Type 1 hypervisor?

A. better application performance B. improved security because the underlying OS is eliminated C. improved density and scalability D. ability to operate on hardware that is running other OSs

Refer to the exhibit. A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles. Which two configuration changes accomplish this? (Choose two).

A. Create an IPsec profile, associate the transform-set ACL, and apply the profile to the tunnel interface. B. Apply the crypto map to the tunnel interface and change the tunnel mode to tunnel mode ipsec ipv4. C. Remove all configuration related to crypto map from R1 and R2 and eliminate the ACL. Most Voted D. Create an IPsec profile, associate the transform-set, and apply the profile to the tunnel interface. Most Voted E. Remove the crypto map and modify the ACL to allow traffic between 10.10.0.0/24 to 10.20.0.0/24.

What is a benefit of a virtual machine when compared with a physical server?

A. Multiple virtual servers can be deployed on the same physical server without having to buy additional hardware. B. Virtual machines increase server processing performance. C. The CPU and RAM resources on a virtual machine cannot be affected by other virtual machines. D. Deploying a virtual machine is technically less complex than deploying a physical server.