Question 41
A network engineer is working on a design for a wireless network that must support data, voice, and __cpLocation services. To support these services, which access point placement must the engineer use?
A. corner only
B. perimeter and corner
C. perimeter only
D. indoor and outdoor
Question 42
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
A. Ensure that channel bonding is enabled on the WLAN.
B. Ensure that the co-channel interference has not exceeded -85 dBm.
C. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
D. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
E. Ensure that the client is dual-band capable.
F. Ensure that the WLAN has 802.11a enabled.
Question 43
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by __cpLocation.Which type of groups should the engineer use to map the smaller subnets to the corporate WLAN?
A. WLC port groups
B. RF groups
C. AP groups
D. interface groups
Question 44
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
A. Paint the access point to cover the LED from being noticeable.
B. Use enclosures to hide the wireless infrastructure in the surrounding environment.
C. Use AIR-AP-BRACKET-1 to allow for greater mounting __cpLocations
D. Deploy environmentally friendly cabling components to blend into the environment.
Question 45
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high co-channel interference. Which profile is used to adjust the parameters for these high-density APs?
A. QoS profile
B. AVC profile
C. RF profile
D. ISE profile
Question 46
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
A. RX-SOP
B. 802.11w
C. AP Heartbeat Timeout
D. Application Visibility Control
Question 47
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
A. roaming design model
B. voice design model
C. __cpLocation design model
D. high-density design model
Question 48
An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located in a building at the entrance of a sports complex. Which type of antenna should be used with the RAP for backhaul connectivity?
A. 5 GHz, 8-dBi omnidirectional antenna
B. 2.4 GHz, 8-dBi patch antenna
C. 5 GHz, 14-dBi patch antenna
D. 2.4 GHz, 14-dBi omnidirectional antenna
Question 49
A network engineer needs to create a wireless design to bridge wired IP surveillance cameras in the parking lot through a mesh AP. To which operate mode of theAP should the cameras connect?
A. RAP
B. MAP
C. FlexConnect
D. local
Question 50
A network engineer is designing a new wireless network. The network needs to have these characteristics: -support high client concentration -optimize client performance -avoid interferenceWhich approach should be taken?
A. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for all APs.
B. Deploy APs near each other for 5 GHz coverage, and disable the 2.4 GHz radios for some APs.
C. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for some APs.
D. Deploy APs near each other for 5 GHz coverage, and enable the 2.4 GHz radios for all APs.
